Motogadget  M-Unit Blue

The M-Unit Blue form Motogadget is the digital control hub for a motorcycle: the heart of your vehicle's entire electrical system. As Motogadget are always pushing the bounds of technology, this latest version of the M-Unit is a significant improvement on its already exceptional predecessor. As before, it's operated either with push-buttons or with conventional, switching handlebars. This switches all necessary components on the vehicle and, at the same time, takes over the tasks of the electrical fuses.

Now, though, it has no less than 12 inputs and 10 outputs, and high quality, interchangeable cable clamps. Most exciting of all, however, is its Bluetooth® LE. This allows the M-Unit Blue to connect directly to the 'm.ride' smartphone app - a totally unique function in today's motorcycle accessories.

A look at the new functions of the M-Unit Blue 

Now you can control the entire set up and alarm system via the m.ride app. Check error diagnoses during operation without having to remove the unit. Get moving safely with an encrypted, keyless 'go' function. And, if you do choose to use the m.drive app, only the approach with your own smartphone will automatically turn on the vehicle voltage, so that your motorcycle is ready to start.

Using the m.button, the number of all switch armature connections is reduced to just a single cable. It switches all necessary components on the vehicle. At the same time, it takes over the tasks of the electrical fuses. Ultimately, the m-Unit Blue cuts down on cabling, relays and individual components in the wiring harness, while still being swift and easy to install.

Features without Smartphone and m-Ride App

• Complete digital button control, 4-button or 5-button operation possible
• Complete replacement for the fuse box. 10 independent circuits are monitored digitally and switched off in case of faults. The backup function is automatically reset after the fault has been eliminated
• Integrated, position independent alarm system
• Integrated, digital, independent display, automatic switch-off optional and adjustable, m.wave mode selectable
• Integrated hazard warning system
• Blinker optionally adjustable as position light
• Spotlight and headlight integrated
• Control of low beam and main beam (up to 200 W switching capacity) with only one push button
• Integrated digital brake light modulator, flashing mode programmable
• Acceleration-controlled hazard warning light (automatic warning)
• Integrated starter relay for starters with magnetic switch (up to 30 A switching capacity)
• Intelligent and configurable control / switch-off of the consumers, in order to be able to use the maximum starting energy of the battery during the start process
• Integrated digital horn relay
• Two configurable auxiliary outputs AUX1 and AUX2
• Diagnostics function for assignment of input, output, switching status of the circuit, short circuit diagnostics, etc.
• Calibration and current measurement allows fault detection of all lamps
• please note - the Standby-Current is approx. 450 μA (0.00045 A).

Features with Smartphone and m-Ride App

• Encrypted connection via Bluetooth® LE (Low Energy), thus tamper-proof security and low power consumption of the smartphone and the m.unit blue
• Keyless-Go (switching on the electrical network by approaching your own smartphone)
• Transmission of alarm events (with date, time, vehicle on the ground, etc.) to the app
• Setting the mode and sensitivity of the alarm system
• Monitoring the current battery voltage in the app
• Diagnostics of all inputs and outputs, measurement of currents, voltage, device temperature
• Error messages in real time as audio output via helmet headset.
• Manual switching of outputs via smartphone (except for starter)
• Firmware updates without removal at any location via smartphone and app
• Configuration of the setup menu without removal at any location via smartphone and app
• Tacho-input for adjustment of vehicle mileage with m.ride enables vehicle management with automatic instructions for maintenance tasks, condition of tires, chain, brake linings, oils, operating materials, spark plugs, etc.
• Logbook records trips and displays vehicle status, alarm events and maintenance tasks
• Display of the parking position and ping! To help with vehicle search
• LIN bus connection available for later connection of suitable Motogadget products

Technical Specifications 

The app m.ride will soon be available for Android (from version 5.0) and some time later for iOS (from iPhone 5). The modern Bluetooth LE is used to pair the m.unit blue with the smartphone. This requires certain prerequisites to the hardware of the smartphone. 

Compatible with the following smart phones:

• Samsung Galaxy S7 / S7 Edge
• Samsung Galaxy S7 / S7 Edge
• Samsung Galaxy S6 / S6 Edge
• Samsung Galaxy S5 / S5 Neo
• Samsung Galaxy s4
• Samsung Galaxy Note 4
• Samsung Galaxy Tab 4 7.0
• Samsung Galaxy Tab S2 10.5
• Google pixel / pixel XL
• Google Nexus 5
• Google Nexus 5X
• LG G4
• LG G5
• Sony Experia Z3 Compact
• OnePlus 3 / 3T
• Huawei P9 / P9 Plus
• iPhone 5
• iPhone 5c
• iPhone 5s
• iPhone SE
• iPhone 6
• iPhone 6s
• iPhone 7
• iPhone 8
• iPhone X