Factory Quickshifter System 6 Supermoto, ATV, MX or Kart

Zoom

Our Price:  £306.37(Inc. 20% VAT) Model:  TLS-QS6LSMX Brand:  Translogic Systems Tweet

*NOTE:  These mounting brackets are available separately and are used to mount the body end of the sensor to the engine.

Installation

Will it fit my bike?

YZF  - CRF  - RMZ  - KX  - KTM - more...
NOTE:  **Universal**  This Quickshifter system will work on any Motocross, Supermoto, ATV & Kart applications

Technical support

As with all Translogic products there is free technical support over the phone and by email for our customers should you require any assistance with this Quickshifter installation.

Features     Enables full throttle gear shifting in 46-64ms without clutch use

This `F' series Quickshifter system for Supermoto applications as well as MX and Karts is self powered by a separate 9v PP3 battery pack and is a full specification quickshifter which allows you to shift up gears at constant or full throttle without the use of the clutch for ultra fast up-shifts at any RPM.   This system allows the rear tyre to maintain traction under maximum acceleration when shifting up the gears and is an ideal tool for those all important hole shot starts.  Typically 3 yards can be gained per gear shift and a saving of around 200ms can be made per gear shift for those long staightaways.  The special long Linear sensor is designed to keep the body section of the sensor out of reach of the rocks and debris and away from the mud packed gear lever and boot area.  It features a triple seal design with anti-vibration construction for superior longevity, also a rugged stainless steel 6.0mm diameter shaft sensor shaft.

General information

This Quickshifter system does not require any dials or complicated set-up procedure.  The Quick shifter ECU is positioned up near the top yoke via the supplied mounting plate.   This system interrupts the pick-up coil wires on the crank or the engine stop button wires found on the handle bar.

The Linear sensor is mounted between the gearlever and the engine/chassis, in some cases we have developed mounting brackets for bike specific application.  There is a ladder frame bracket supplied as standard to enable effective installations to be carried out.   These long Linear sensors monitor the position of the gear lever for precise quickshifting and offer repeatable quickshift triggering to 0.10mm.