Motogadget Motoscope Pro Digital Speedo

The motoscope pro is the most recent generation of motogadget's digital dashboard series.

Cutting edge technology enables us to create ultra-slim casing designs. 734 LEDs - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rpm count is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals via the display. A special touch-sensitive display section replaces the menu push-button. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments.

The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional breakout boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible. E. g. we have forthcoming a dedicated box for Triumph bikes communicating plug 'n ride with the digital bus systems of the Streettriple and Speedtriple.

The aluminium casing is turned from a solid block and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE and does not have to be registered.

Length, Height, Depth: 109 mm/ 47 mm/ 11 mm

Weight w/ cable: ca. 100 g

Mounting: 2 x M3 threaded hole

Power consumption during operation: max. 200 mA (load dependent)

Power consumption in standby: 0.4 mA

Operating voltage: 9 V - 15 V

Operating temperature: -20°... +80°C

Feature	Measuring range
Rev counter (LED bargraph)	0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer	0 – 350 km/h or mph
Trip meter A	bis 999.9 km or mi
Trip meter B	bis 999.9 km or mi
Total mileage (adjustable)	bis 250000 km or mi
Operating hours/Service	0 – 9999.5 h
Clock	23:59 h/min
Timekeeping	0 – 99:59:59 h/min/s
RPM count (on LCD)	0 – 20000 rpm
Adjustable RPM warning (gear shift flash)	0 – 20000 rpm
On-board voltage	9  – 18 V
Low voltage warning	Warning if below ca. 11V
Timekeeping 0 - 100 km/h or 0 - 60 mph	0.00 – 30.59 sec.
Actual accelleration	+/- 0.00 – 1.50 G
Average speed	0 – 350 km/h or mph
Max. speed	0 – 350 km/h or mph
Max. RPM	0 – 20000 rpm
Max. positive acceleration	+1.50 G
Max. negative acceleration	- 1.50 G
Gear display	N, gear 1 - 6
Green control LED (w/ breakoutbox A/B)	Neutral (N)
Green control LED (w/ breakoutbox A/B)	Turn indicator left/right
blue control LED (w/ breakoutbox A/B)	High beam
Red control LED (w/ breakoutbox A/B)	Miscellanious warning funktions
Fuel/Reserve (w/ breakoutbox A/B)	0 - 100% w/ low warning
Air temperature* (w/ breakoutbox B)	-20 - 80 °C / -4 - 176 °F w/ high/low warning
Water temperature* (w/ breakoutbox B)	40 - 120 °C / 104 - 248 °F w/ high/low warning
Oil temperature* (w/ breakoutbox B)	40 - 150 °C / 104 - 302 °F w/ high/low warning
Oil pressure* (w/ breakoutbox B)	0 - 8 bar / 0 - 116 psi w/ high/low warning