The Motoscope TinyWith the installation diameter of 49 mm and the installation depth of 24 mm it provides a wide rage of mounting options.
The motoscope tiny by motogadget is a very small analogue speedo. It measures the vehicle speed digitally and displays it very precisely with a stepper motor and a pointer.
The finish and quality is high as usual with motogadget products.
Ingenious technology makes the classical look possible without compromises. The dial completely gets by without display cut-out and LC-Display.
The display of digital values is achieved from a LED display that shines only in the switched ON state from the back of the dial.
Thus looks the motoscope tiny persuasive in a classic style and uses digital technology extremely unobtrusively The perfect solution for those minimalists searching for a small analogue speedo.
The robust aluminium billet housing is made on CNC-machines, brushed and black anodised. The Bezel on top is also black anodised or mirror polished available.
The housing is completely waterproof and vibration resistant.
Display and Dial
The beautiful analogue dial in black and white is illuminated with white LED back light. Behind the black part of the dial an LED display is hidden which is only visible during operation. When the bike is switched off you cannot see it.
To get best readability in the dark, dawn and sun light the brightness of all LEDs is automatically dimmed to suit.
If 200 km/h is exceed and the analogue scale is at the end the speed is displayed numerically in the LED display
Integrated in the black part of the dial are also the four indicator lights (blue, red, yellow, green). Also they are only visible when illuminated.
You chance the display and setup the instrument with one push button at your handle bar.
The standard display shows the clock. All other values like odo, trip odo, max. speed can be displayed with one push on the button. Also with this button you do also the reset, adjustment and setup. Your setup and specific values will be saved in the motoscope even without power supply.
Installation Wiring and Sensors
Due to the small size of the instrument you can mount it on every vehicle with two threaded holes (M3) at the back of the housing.
We offer several brackets to install it. Further brackets will be offered in the future. Please have a look in the web shop.
A reversal voltage protection, a simple wiring and the detailed installation and operation manual makes it easy to install.
The delivered high quality speedo sensor made of stainless steel is very small too (M5/23 mm). It has a cable of 1,5 m length and can be installed easily at the front or rear wheel.
The motoscope tiny is also compatible with most of original speedo sensors (Dry-Reed and inductive proximity sensor like BuellTM older Harley-DavidsonTM). In this case you connect some cables and you do not need to install a sensor.
An intelligent 'Teach-Function' enables the instrument to calibrate itself when riding the bike.
The housing is always black. The bezel is black anodised or polished available.